WEIWEIBEIER 3PCS Cycling Bicycle Tyre Tire Spoon Repair Removal Tools Steel Flat Tire Pry Bar Stick Tire Bike Accessories

NotePlease allow 1-3 cm error due to manual measurementThe picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.How to replace the tire correctly and remove the tire1: Let go of all the air in the inner tube, we can use the key part of the crowbar against the heart of the gas door to degass.2: Recognize that the pry rod is using that head, which side to pry. When digging a tire, we use the slightly raised part to pry, that is, the part is waiting to enter the outer tire to pry the tire.3: The position of the first stick starts on the opposite side of the air mouth. First pinch the outer tire, pull it aside, and then insert the crowbar into the bottom of the outer tire, again remind the pry rod of the use of steps, now in the photo to see very clearly. Remember not to insert the crowbar too inside, or you may leave a few more holes in the inner tire4: After the first bar is pried open, secure the pin of the crowbar to the steel wireThe position of the second stick and the first stick should not be too far away, close to the first stick, the steps are the same as the first stick5: After prying, the same is stuck to the steel line6: If you are using a soft-edged tire or a general outer tire, and is not a CR-18 type of circle (because the lap edge of this type of circle is too high, so most of the outer tire side will be very tight, prying must be very careful and laborous), basically can be used directly with pry The tire rod is directly shallow along the tire edge to draw a circle (when rowing this lap should pay attention to the crowbar pull outwards, do not stick to the steel ring hard pull, otherwise easy to damage the anode electroplating on the ring), of course, if you can directly hand (preferably wear gloves). If it is still tight, continue to pry with a crowbar.7: Then take the nozzle out of the steel ring. Be careful with this step,

• Material: Tool steel
• Color: Silver; Weight: 90g
• Size: Total length：122mm
• Thickness：3.4mm
• For installing and removing tires outside the bike